Handy for holding detergent, dryer sheets, stray socks, and more, this simple Laundry Organizer is just the right amount of extra space you need. Strong profile shelves hold heavy loads without bowing and a hanging rod holds "hang-to-dry" clothes.
Don't worry...this freedomRail laundry organizer is super easy to install! The instructions you will receive actually say "Step one, you're almost done!" You can even add additional components in the future without having to buy a whole new system.
Everything begins with the mounting rail. This is what you do:
1. Measure from the floor to the height of where you want the organizer to hang. If you are placing the unit over the washer or dryer make sure you leave enough room for your clothes to hang. With a pencil, make a level line at this height.
2. Place the rail on the wall so the line is visible through the mounting holes. Make a circle at each hole. NO need to align the holes with studs. The system includes anchors & screws.
3. Drill each hole with a 5/16 inch drill bit.
4. Tap the plastic anchors into each hole (each hole is 8 inches apart) then place the rail over the anchors and twist in several screws to hold the rail.
5. Insert and tighten all screws with a power drill until the anchor tightens into a ball behind the drywall. Place cover stickers over each screw head.
The uprights simply hang on the rail that you just installed! From here you complete the installation by attaching the brackets, rods and shelves at the appropriate intervals. That's it.
Enjoy your new laundry organizer and feel good knowing that you did it yourself!
Shown in white wire or choose white, cherry, or maple finishes.
Laundry Organizer (Detailed Information)
- Total Shelving Space: 8 ft.
- Total Hanging Space: 2 ft.
- Shelf Depth: 12 in.
[ More Information About This Product ]
Closet Planning & Installation Guide
| Brand: |
freedomRail |
| # of Shelves: |
3 Adjustable Shelves |
| Shelf Dimensions: |
14 x 24 inches , 14 x 48 inches
|
